- Plastic Film[9]
- PET[9]
- Other Packaging Materials[1]
- Polyester Fiber[7]
- 100% Viscose Fabric[1]
- PBT[2]
- 100% Cotton Yarn[1]
- Contact Person : Mr. Xue George
- Company Name : Jiangsu Sanfangxiang Group Co., Ltd.
- Tel : 86-510-86229006
- Fax : 86-510-86229848
- Address : Jiangsu,Jiangyin,Zhouzhuang Town, Jiangyin City, Jiangsu Province. China
- Country/Region : China
- Zip : 214423
general packing PET film
1.Product spections
| thickness | width | ROLL ID |
| 8~36um | 380~2000mm | 76.2mm(3"),152mm(6") |
| connector number | the connector number of each roll for superior product:≤1 base on the standard length,connector rate of each roll:≤10% | |
note:other specifications of the film may be adjusted upon consumer request. conventional length is equivalent to 12 um of 6,000m; 18000m; 24,000m ,etc. | ||
2.Characteristic Feature:
| 1.Polyester Film with higher modulus and excellent Tensile Strength can be satisfied with the requirements of the longitudinal and precision printing.Because of excellent Tensile Strength,Polyester Film can be used for High-speed printing. |
| 2.Polyester films needs to have enough surface wetting tensions to ensure the adhesion of the printing ink fastness.Especially it should do some treatments on the surface to adapt to the shallow network printing.The surface wetting tensions can reach to above 52 mN/M. |
| 3.The thickness tolerance of the film is small.The larger thickness tolerance is not better for the printing uniformity.The thickness of our BOPET films produced by the first-class equipment is uniform.It's average thickness tolerance is less than 2%. |
| 4.The film electrostatic which not only affects the printing fastness,but also lead to film blocking and dust absorption.etc,could be eliminated through special processing. |
3.Typical Property Values:
| Item | Units | Typical Values | Test Method |
| Nominal thickness | um | 12 | DIN 53370 |
| Thickness Deviation | % | ±1.5 | ASTM D 374 |
| Tensile strength (MD/TD) | MPa | 220/240 | ASTM D 882 |
| Elongation (MD/TD) | % | 120/110 | ASTM D 882 |
| Heat Shrinkage(MD/TD)150°c,30min | % | 1.8/0.3 | ASTM D 1204 |
| Haze | % | 3 | ASTM D 1003 |
| Gloss | % | 130 | ASTM D 2457 |
Surface Wetting Tensions Corona Discharge NO corona discharge | Dyne/cm | 52 | ASTM D 2578 |
| 40 | |||
Note:MD=machine direction, TD=transverse direction. This specification is typical product information.The rusults should only be interpreted as a general guide to material properties,not as a guarantee.Certificates of analysis are available upon customer request. | |||
4.Disclaimer
Note:This Information is the best currently available on the subject.The results should,however,only be
regarded as a general guide to material and not as a guarrantee.Customers must decide for themselves
whether our products will suit your specific application.Some of the information can be changed as a
result of supplier's efforts to improve the quality or efficiency of the subject.
general packing PET film
